Paul:
I have tried the stipper wheels. Your right, wear goggles but it also tends to
heat
up and smear the material. I tried Bob Howard's suggestion of kerosene and it
works
quite well. Just let it sit for a few minutes, use a putty knife, wire bursh and
lots of rags. What a mess.
Don
Paul Hammarstedt wrote:
> Paint and Rust Stripper wheels by 3M work well. Fling nasty chunks of stuff
>all
> over too, so eye protection is highly recommended. Some say paint stripper
> works too, but I've not tried that. I've tried heat guns and putty knive
> without enjoyment too.
>
> It isn't a fun task no matter what. But the 3M wheels fit in a drill and work
> really well. They look kind of like super aggressive scotch pads.
>
> Paul Hammarstedt
> 71 MGB on jackstands for 4 years....what a slacker!
>
> Don Hicks and Family wrote:
> >
> > Does anyone have advice for removing undercoating from fenders etc. Wire
> > brushing seems to just heat it up and move it around.
> >
> > Don Hicks
> > 70 MGB GT -"Morris"
> > 74 Midget
|