You can use new plastic receptacles into the holes of the car body, wherein
the air intake grill fits into.
The wire mesh should fit in between.
I had no problem whatsoever with the mounting.
Cheers,
Hans
71 BGT
> -----Original Message-----
> From: chief bootknocker [SMTP:mowog77@theglobe.com]
> Sent: Friday, June 25, 1999 2:59 PM
> To: mgs@autox.team.net
> Subject: Air intake grill
>
> I just bought a wire mesh cutout to put under my air intake grill and I
> was wondering if anyone has some good suggestions on how to put the
> retaining clips back on. The dilemma, if you haven't done it, is how to
> get the clips in - if the mesh is not present you just slip you fingers
> through the top of the grill and press them onto the posts. With the mesh
> in the way this is impossible.
>
> I talked to a guy who had it on his air intake grill, but he said that the
> mesh worked like a retention clip on his and he did not use the clips.
> Mine, however is lose when everything is in place.
>
> TIA,
> Erik.
>
>
> "Free web-based email available now at http://www.theglobe.com";
|