Also check valve size. There is an early B series head found in the USA on
Nash Metros' that has real small valves. Again this can be cut for the
larger valves.
Austin/Wols/Morris In 34.95mm Ex 30.20mm
MG 1500/1600 In 38.25mm Ex 32.60mm
MG 1600 Mk II In 39.80mm Ex 34.10mm
Kelvin.
> <<Quick question, I'm away from my books for a couple of days
> - Is there any
> difference between the cylinder heads on a MGA 1500 and an
> MGA 1600 Mk1.
> Obviously there is a bore size difference, but excuse my
> Be careful that the heads you are buying are actually MG
> heads - if they are
> Austin, they will likely be the old 68 horse spec. It is easy
> to make Austin
> heads into MG heads - first buy a can or red engine paint......
|