Erik -
Well I'm not quite qualified to answer this - but if I'm outrageously
wrong, perhaps somebody more knowlegable than I will save you from my
50%-wisdom. The HS4s I put on my '76 have two ports front and two ports
back. The ports facing toward the air cleaners are not fuel ports but
vents plumbed a "T" and hence off to the charcoal canister. The other two
are fuel ports. On mine, I had to rig a "T" in the fuel line to feed both
carb's. Could it be that the front carb's with three ports are simply
designed to eliminate the "T" I had to rig? In other words, the ports are
"vent" , "fuel in", and "fuel out" to the rear carb. The rear carb's two
are "fuel in" and "vent".
' Just a guess. Let us know how you come out on this.
Allen
From: "chief bootknocker" <mowog77@theglobe.com>
>
>Hello everyone,
>
>I have asked this before and not received a straight answer. If any one
>has the HS4 setup with the front float bowl having three input/output fuel
>ports and the rear with the normal two ports, could you please take a look
>at them and tell me how they are routed.
>
>I took pictures at the latest MG show put on by Moss and the only people
>with that setup said that they did not know how it was plumbed!!!!!!!! I
>am going to go ahead with the conversion and that is just one of the
>nagging problems I have to solve.
>
>TIA
>Erik.
>
>
>"Free web-based email available now at http://www.theglobe.com";
>
******************************************
Allen H. Bachelder =iii=<
Sinking Creek Home for Wayward MGs
New Castle, VA 24127
USA
540/544-7333
******************************************
|