Matt, I noticed this on my car shortly after I bought it. When rotated back
and forth, the was a "rough" spot. This concerned me as I thought that the
splines might be damaged, the car ran OK otherwise. I later found that I
had virtually no oil in the diff. I put this rough spot down to the diff
operation but I haven't re-cheched to see if that rough spot is still there.
This is one year down the line and no siezed bearings yet.
Regards,
Mike
'73BGT - daily driver
Matt.DeBoer@ejgallo.com wrote...
>
>I didn't receive any input the first time around... please help!
>
>Hi All-
>
>I recently had the rear end of my '72 B in the air and rotated hub back and
>forth about a quarter of a turn. When reversing directions, there was a
>"rough" spot that felt like portion(s) of a ball bearing or two were
>missing. The car goes down the road fine... but I suspect not for long!
>
>Any and all guidance would be greatly appreciated,
>
>Matt
>
>
|