mgs
[Top] [All Lists]

Re: 73B M/C Removal,- Reply

To: mgs@autox.team.net
Subject: Re: 73B M/C Removal,- Reply
From: Florrie & Allen Bachelder <bachldrs@swva.net>
Date: Mon, 5 Apr 1999 20:07:25 -0400
Dan -

My ancient Snap-on socket set has a 17/32" - which is absolutely necessary
for something on my '73 and '76 Bs - but I'll be darned if I can remember
what it is.  ' Think it may be the filler bolts on the shocks.  Could that
be the size you need?

Allen

From: "Scotty" <scotty@dove.net.au>
>
>
>On Sunday, 4 April Dan Wrote
>
>
>>>>>>>>>>.snip<<<<<<<<<
>>Now everything is loose but the two nuts that fasten the housing to the
>>firewall! Aarggh! Maybe these two nuts are the infamous Whitworth type
>>(this is a pretty original car, mind you, which is good and bad for me),
>>because 1/2" is too small, 9/16" is too big, and 13mm and 14mm don't fit
>>either!
>>>>>>>>>>end of snip<<<<<
>
>Dan,
>         in this situation I use 'Metrinch' tools, sometimes they can't be
>beat.
>Have fun !!
>
>Scotty,
>Adelaide,Australia.
>



<Prev in Thread] Current Thread [Next in Thread>