I had a direct acting gauge in a little '62 Ford Falcon P/U that I'd
shoehorned a 302 V8 into. All was well until the little bellows thingy
in the gauge sprung a leak and oil started dripping out of the dash!
Never again!
CR
AKBLACKLEY@aol.com wrote:
>
> I dont have a part number for an alternate part. I suggest that you consider
> replacing the electric oil pressure gauge with a mechanical gauge and copper
> capillary line and fittings from a later ('72 to '76) 'B. I did this and its a
> simple, worry free job. A used gauge can be had for $15 to $25. Cheers, Andy
|