Regarding John Twist's solution, I read the tech note regarding the
addition of a piece of wire on the head gasket and I'm unclear as to
what size wire should be used. If I understand the description, one
should take a length of stranded wire and use ONE of the strands from
that wire. Is that correct? Is one small strand enough to cure the
problem?
Eric Zambori
ccrobins wrote:
>
> Simon,
>
> The leak can only get worse. Before it does, if I were you, I'd
> replace the head gasket and include John Twist's piece of wire. Check
> the head to make sure it isn't slightly warped, too.
>
> There were some recent posts on how to do this job right.
>
> CR
|