've had gooed experience with white spirit.
The conectors wherin the bullets go into should be replaced at first
suspect.
Many times these connectors have lost the clamping capabilities and have
become brittle.
Cheers,
Hans
'71 BGT the first seat = ready with new upholstery - like this job
> -----Original Message-----
> From: Fred Pixley [SMTP:fpixley@kingston.net]
> Sent: Saturday, March 13, 1999 13:30
> To: mgs-digest list
> Subject: Connector Cleaning
>
> I'm wondering if there is a better way to clean the typical bullet
> connector. Sandpaper tends to wear through the outer coating and might
> encourage rusting. Wire brushes are OK if the corrosion isn't too
> extensive.
>
> Fred Pixley
> Napanee, Ontario
|