Edwin,
After I bought my '77 MGB, I had several problems.
(Too numberous to list)
I felt it was best to just tear out the entire
wire harness (bumper to bumper) and replace it
with new ones bought from Moss.
It was a difficult (yet enjoyable) job.
Most of the problems I encountered while doing
this task was running the harness's from the
engine compartment throught the fire wall, and
under the dash.
Take your time! and be VERY patient.
You'll solve all kinds of headaches once you
get this job completed.
Good luck, I wish I could be there to help,
Dennis
dberman@nortelnetworks.com
>
> Date: Mon, 22 Feb 1999 14:15:11 -0600 (CST)
> From: Edwin Vaughan <vaughme@mail.auburn.edu>
> Subject: MGB'77 dash wiring harness
>
>
> Hello,
>
> Has anybody with a 1977-1980 B installed one of those dash wiring
> harneses available from The Roadster Factory? I figure this will be the
> easiestway to correct the wiring atrocities commited by one of the DPOs.
> Are they real difficult to install? How is the quality?
>
> TIA
>
> Edwin
> '77B(still refusing to start)
>
> "I try to think but nuthin' happens" http://www.auburn.edu/~vaughme
> -- Curly (the stooge)
>
>
|