I used a liberal amount of WD-40. Wiped up the excess, and the squeeks went
away.
Larry Hoy
http://home.cwix.com/~larryhoy@cwix.com/
> -----Original Message-----
> From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net]On
> Behalf Of Florrie & Allen Bachelder
> Sent: Tuesday, February 09, 1999 5:44 PM
> To: Andrew Errington
> Cc: mgs@autox.team.net
> Subject: Re: Turn/high beam/horn switch '69B
>
>
>
> I share you opinion of that replacement unit, having bought one (on
> sale) last fall. The turn portion of mine is very rough, makes a
> "skreek!" noise when operated to the right. I expect it to break every
> time I use it. I should remove it and polish the sliding surfaces, but
> I keep hoping it'll "wear in."
>
> CR
>
> Just a thought - would aerosol-type volume control cleaner from Radio Shack
> smooth this out?
>
> Allen
>
> Allen H. Bachelder =iii=<
> Sinking Creek Home for Wayward MGs
> New Castle, VA 24127
> USA
> 540/544-7333
>
>
|