mgs
[Top] [All Lists]

NO valve job needed

To: <mgs@Autox.Team.Net>
Subject: NO valve job needed
From: "Walt" <waltcpa@sierra.net>
Date: Mon, 23 Nov 1998 11:00:57 -0800
Listers,
Thanks to all who made suggestions about checking things to determine if a
valve job was really needed.  Well, after all the tests here is what was
found:
        Compression (rounded to the nearest 5) was 120,115,115,120 (1 to 4)
        All plugs were black and 2&3 were wet with gas when pulled
        Rotor, cap, and wires all checked OK
        Plug 1 had good spark, 2&3 no spark, and 4 weak intermittent.

Bad plugs!!  Had put new Autolite platinum in less than 2000 miles ago, but
as soon as new Champion N-9Y's were installed, ran fine.  Need to adjust
the carb (Weber DGV conversion by DPO) but otherwise seems to run good. 
Any thoughts on why plugs would go bad that quickly?  Wrong brand maybe?

Walt

Walt Goddard
waltcpa@sierra.net
77B - Willie Nelson  (on the road again)

<Prev in Thread] Current Thread [Next in Thread>