-----Original Message-----
From: Barney Gaylord [mailto:barneymg@ntsource.com]
Sent: Sunday, November 22, 1998 11:53 PM
To: larry.g.unger@lmco.com
Cc: fisher@hctc.net; mgs@autox.team.net
Subject: Re: MGA: Optional Headlamp Flasher Relay
>> [snip]...
>> So, the question is ... if I fit the relay that is
>> intended for the O/D will it handle the amperage for
>> the headlamps? ... or, will I just toast a NOS bit?
>> [snip] ...
>
> I realize that this is not a trick question, but the
> answer is a trick on the public by the car manufacturer
> (not the relay manufacturer). If it bears the same
> Lucas model number, it is probably the same part.
> [snip] ...
> It needs to handle about a 10 amp load, but only
> intermitently when used for a headlamp flasher. When
> in doubt, hook it up to the headlights, and give it a
> try.
> [snip] ...
Thanks again Barney ... "yours is a superior intellect!"
**********************************************************
Safety Fast! ... larry.g.unger@lmco.com
'61 MGA 1600 MkII
|