mgs
[Top] [All Lists]

Re: Dead new family member...

To: "Andrew B. Lundgren" <lundgren@iname.com>
Subject: Re: Dead new family member...
From: Mark Snowdon <racer45@bellsouth.net>
Date: Sun, 22 Nov 1998 15:28:21 -0800
Andrew B. Lundgren wrote:
> 
> On Sat, 21 Nov 1998 18:06:16 -0500, Chris Chandler wrote:
> 
> >
> >It cranks but doesn't fire.  At this point the only thing I can think of
> >is that it isn't getting spark.  Could someone explain to me how I would
> >go about checking for spark?
> 
> There are at least two ways.  You can pick which one you want to use.
> 
> One:  Pull of a spark plug wire; sick a phillips screw driver about the
> same size as the tip of your plug into the wire contact.  Then hold
> onto the metal part of the screw driver with one hand and lean
> (preferably in shorts) against the side of the car.  Then have a helper
> turn the ignition over. The person who is turning the engine over will
> be able to tell you if there is a spark if you are not sure.    If you
> did get a spark, and are willing to continue more with option one, pull
> a plug out, hold tightly to the metal base, continue leaning against
> the car and have the helper turn the engine over again.  As with before
> the helper should be able to tell you if there was a spark if you
> missed it.
> 
> Two: Pull of a spark plug wire; sick a phillips screw driver about the
> same size as the tip of your plug into the wire contact.  Then hold
> onto the INSULATED part of the screwdriver.  Hold the metal part of the
> screw driver close the a ground on the car.  (The air rail is pretty
> easy to reach from where you will be if you still have one.)  Don't
> ground yourself to the car or anything else. (Unless you want to try to
> make things a little more interesting.)  Have a helper turn the engine
> over.  If there is spark you will see it jump between the screw driver
> and the ground.  If you aren't seeing any move it to a point where it
> is almost touching the ground and keep watching.  (It is ok to touch
> the ground accidentally in my experience.)  If you do get a spark, pull
> the plug out, stick it in the wire; ground the metal base of the plug
> and see if there is a spark when the engine is turned over.  (The
> helper won't be able to tell you if there was a spark using this
> method.
> 
> If case you are wondering option one really will work, it won't kill
> you.  (Unless maybe you already have a bad heart...)  And you will
> REALLY know if there is spark, and you probably will go with option
> two, unless you liked it...

You will also get a cool new nick name, right "Sparky"?

Mark "Sparky" Snowdon, I got mine when trying to pull the spark plug
wire off a running engine. Same effect, not recommended.

<Prev in Thread] Current Thread [Next in Thread>