To: | mgs@Autox.Team.Net |
---|---|
Subject: | Shocking |
From: | WSpohn4@aol.com |
Date: | Wed, 18 Nov 1998 10:27:46 EST |
<<What size wrench is needed to remove the 4 bolts that hold the shock (damper) onto the a-arm? Could it be an 21/32? None of my Whitworth or metric will work. Steve>> Whoa - I trust you mean remove the entire shock from the frame (as removing the arms from the shock is not recommended). As I recall, it should be a 9/16", ie a 3/8" bolt, at least on early MGA, which should be the same as TD. Bill S. |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: NAMGBR, RaceF1 |
---|---|
Next by Date: | [Fwd: BRIT CARS FS], Chris Rogers |
Previous by Thread: | Back in the saddle again, Dennis Berman |
Next by Thread: | Free Midget in NJ, Kai Radicke |
Indexes: | [Date] [Thread] [Top] [All Lists] |