Bill:
You may be aware of a twin cam I spotted at last year's Moss
Fest. It was an 1800 cc 5 main with a belt driven MGA twin cam head.
The engine was in a highly modified MGA shell set up to run the Pan
America. Very interesting drive set up.
Kelvin.
-----Original Message-----
From: WSpohn4@aol.com [mailto:WSpohn4@aol.com]
Sent: Sunday, November 08, 1998 8:48 AM
To: mga@ffwd.bc.ca
Cc: mgs@autox.team.net
Subject: Re: mga: Twin Cam Pt2.
In a message dated 11/08/98 2:58:12 AM Pacific Standard Time,
neil.cairns@virgin.net writes:
<< The head
carries two cast iron camshafts, with 20;50;50;20 valve timings, and
.375" lift. The inlet valves are 1.6" dia. and the sodium cooled
exhaust
valves 1.44" dia. Both set at 45 degree angle in the head, with double
valve springs. >>
|