At 11:23 AM 10/15/98 -0700, Skye Poier wrote:
>I've seen several suggestions regarding tapping the CENTER of something
>laid across the bore - this seems impossible unless you have the two halves
>of the caliper apart, and I'm sure I read somewhere that the calipers
>are not meant to be disassembled.... ?
>
>Skye
>
Hmmm...I never heard that one. I took mine apart, cleaned everything, honed
the bores to clean up the rough spots, and reassembled with a new seal. I
wouldn't suggest splitting the caliper if you don't have new seals - it
would probably leak.
Regards,
Rich Mason
'73 MGB
Madison, AL
---------------------------------------------------------
e-mail--> rmason@ro.com
MG Page-> http://ro.com/~rmason/mgpage.htm
NABMS --> http://www.geocities.com/MotorCity/Garage/5207/
---------------------------------------------------------
|