Your side snap points sound correct. My zipper goes all of the way to the end
of the cover so my drivers side stays tight. You might want to look at another
car
before installing the snaps to make sure...
I have the stock bar for mine to support the back. It is very nice when you
snap the
cover down behind the seats. It holds every thing very tight.
On Tue, 29 Sep 1998 11:36:57 -0400 (EDT), RAY WYGONIK wrote:
>I installed my birthday tonneau cover on my B and overall it looks good.
>Someone mentioned snaps behind the vent windows. I plan on putting a snap on
>either door just behind the mirror & vent windows. It looks as if the tonneau
>needs this attachment point. I am also going to mount an extra lift-the-dot
>fastener at the middle of the dash to hold the driver side taunt. The zipper
>stops several inches from the end and leaves the cover sag a little on the
>drivers side. The instructions do not indicate attachment points at either of
>these locations.
>
>Just wanted to run this by the list, though I've reached the point with the car
>where I realize that you do whatever works for you. I don't have a bow for
>across the middle behind the seats, but with the headrest on the seats and the
>folded top bulging some it doesn't seem like I really need it. Would
>appreciate comments on whether or not I need to purchase the bow/support.
>
--
Andrew Lundgren
lundgren@iname.com
|