_____Orginal Message_______________________
Date: Wed, 2 Sep 1998 23:32:47 -0500
From: "Don Collins" <decolins@flash.net>
Subject: GM alternator conversion question
Could anyone who has done the conversion to the 1967 style GM alternator
please answer a question? I just need to verify the wire layout on the
install. It appears to be a bit different from the 72-82 style GM that I was
running before.
TIA
Don Collins
69B
_________
This is a quote from Dan Masters:
<Wiring instructions couldn't be simpler. On the side of the unit, you
will find two recessed terminals, and on the back, there is one large
screw terminal. The plug you get will have two wires coming from it, and
will only fit in the slot one way. Just connect the brown/yellow wire
(the small one) that now goes to your alternator to the plug wire that
goes to terminal 1, and connect the wire from the plug terminal 2 to
the screw terminal on the back. The large brown wire also goes to this
screw terminal. That's all there is to it.>
Hope this helps
Bob,71 mgb
|