To: | "Richard D. Arnold" <richard.arnold@juno.com> |
---|---|
Subject: | Re: 1500 Midget Clutch problems.... |
From: | Paul Hunt <paul.hunt1@virgin.net> |
Date: | Thu, 18 Jun 1998 20:10:58 +0000 |
Richard D. Arnold wrote: > > Miss Molly's clutch is engaging and releasing about 1.5" from the floor. > > The clutch, throwout bearing, slave cylinder, line, and clutch master > cylinder are all new. I am using DOT 5 fluid, and I *think* it is bled > correctly. A fairly common problem on the B is worn pedal, clevis pin and m/c actuating arm (you should have got rid of the last one) where they all fit together. Replacing the clevis is the easiest bit but only gets rid of one third of the wear. PaulH. |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | TD brake pull, Dave Houser |
---|---|
Next by Date: | TD cam wear check?, Dave Houser |
Previous by Thread: | Re: 1500 Midget Clutch problems...., hello39 |
Next by Thread: | adjustment of plastic floats in SU HS carbs, Dirk de Boer |
Indexes: | [Date] [Thread] [Top] [All Lists] |