I knew I had seen this somewhere. My handy-dandy seach engine pointed me to:
http://www.mgcars.org.uk/cambs.mgoc/tips.htm#Build your own Easybleed
by Jay Tilton
Hope this helps.....
Carol
At 11:45 AM 6/11/98 -0700, Scott McKorkle wrote:
>Joe,
>
>I printed out the home made EZ Bleed instructions and have them at home.
>As I recall, they are too long for me to re-type, but if you can email me a
>fax number, I'll be glad to fax them to you as soon as possible.
>
>Regards,
>Scott McKorkle
>Issaquah, WA
>1978 MGB
>
>----------
>> From: Joe R. Koster <jkoster@ncpi.com>
>> To: MG list <mgs@autox.team.net>
>> Subject: Jay Tilton
>> Date: Thursday, June 11, 1998 10:47 AM
>>
>> Hello Everyone!
>> Its me again. I found out that the home made Ezee bleed was on Jay
>Tiltons
>> Home Page. I was wondering if Jay is still out there and If he still
>Knows
>> how to build the Ezee bleed? His Home page is no longer there, or does he
>> have a new address. Thanks to anyone that can get a hold of him or If jay
>is
>> out there can you tell me how to build the Ezee bleed?
>>
>> Thanks!
>> Joe Koster
>> 71 MG Midget
>
>
|