It must be in a bit of a sideways bind at full extension. Try pushing
it from the side, all 4 quadrants and then bend the linkage to the jet
accordingly. Worked for me....
CR
Trevor Boicey wrote:
>
> As the title says, the back carb choke is sticking full-on
> in my 70B. Took me forever to find it since the linkage wasn't
> sticking just the jet, but that's another story.
>
> Anyways, what usually causes the choke to stick? It only sticks
> full-open so I suspect there is some specific defect somewhere
> that is making it stick, if I reach under and push lightly it
> snaps back into place smartly.
>
> Ideas?
>
> --
> Trevor Boicey, Ottawa, Canada.
> tboicey@brit.ca, http://www.brit.ca/~tboicey/
> [ Seeking some miscellaneous MG parts, see the list on the web page... ]
|