Bill,
I have purchased an MGA cam for my roadster rebuild from Northwest
Import parts. They are here on the web at:
http://www.classicar.com/vendors/nwimpprt/NIPCONT.HTM
Last Fall I paid $49.00 plus $60.00 for the core. They charge $10.00 for
any lobe worn more than 0.020". My core was fully refunded. Haven't had
the car running yet but don't expect any problems. I just looked, and
the regring is now at $55.00. They have a street grind for $69.00.
I replaced the cam with a regrind during the rebuild on my MGA coupe
about 10 years ago with no problems since.
No financial interest etc. yada yada yada.....
Regarding the rockers. I replaced the rocker shaft also. I found the
wear to be through the case hardening. Also don't forget to inspect the
rocker arm bushings. Mine were essentially gone!.
Chuck Schaefer
56 MGA Roadster (undergoing a long and enjoyable restoration)
61 MGA Coupe (my runner)
Bill Eastman wrote:
>
Where is the best place to but a cam? Moss wants $200+ and VB has a
> regrind for $100. Someone said that SICP has good cams at a reasonable
> price but I don't have the info or how to get hold of them. What about a
> slight performance cam? The rest of the engine is bone stock but I have
> never bought a stock cam in my life so if anyone has had success with a
> slightly hotter cam, I would appreciate the input........
>
> Regards,
> Bill Eastman
|