Eric Murphy wrote:
>
> I'm having some trouble replacing the steering rack boots on my 75
> B. Im trying to separate the ball joint from the steering arm. It dosen't
> want to let go. I've tried the methods in the Haynes manual, and the
> suggestion from the Moss catalog. Hiting it with a hammer, as the Haynes
> suggests, was no good. "Beating it down" with a brass drift and big hammer
> was no good either. I'm hesitant to use an air hammer, like Moss suggested.
> Is there some preticular tool I need? Any help would be greatly
> appreciated.
>
> Eric Murphy
Eric
Try the hammer method again - this time try two hammers and beat
rythmically on the joint - It will give eventually!
Rick
|