Charley Robinson wrote:
> If you go from the stock headpipe to the Peco, you may have
> to do some welding or get an adapter from 2" to stock diameter.
> That's a question I'd ask Moss - about how to adapt from Peco
> to stock....
Don't fit an adapter (that increases the stock diameter to 2")
after the downpipe ... else, the 'Y' (point were the stock down
pipe joins the two secondary pipes into a single pipe) would be
your greatest point of restriction ... unless you modify the 'Y'
in the down pipe so that the two secondary pipes are joined into
a single 2" pipe, you won't get the full benefit of the Peco
system.
Safety Fast! ... larry.g.unger@lmco.com
'61 MGA 1600 MkII
|