Matt Kulka wrote:
> Now I have a real mess. If I'd have left it alone, I could have drilled
> the whole mess out oversize, and installed a heli-coil. But I don't own
> a drill bit that can chew into the hardened metal of a screw-extractor.
> I know, because I tried.
A good local machine shop can remove that via EDM, Electron Discharge
Machining. A really fancy firey process that works wonders.
The trick is getting it to them.
--
Trevor Boicey
Ottawa, Canada
tboicey@brit.ca
http://www.brit.ca/~tboicey/
|