>***********************************
>Gary:
>
>Both Moss and VB offer these (page 35, VB), (page 37, Moss). If you
>happen to get plans(including thickness), please let me and the list know. I
>believe both commercial sources are in the $200 (US) range. 1/2" plywood
>here runs about $40 a sheet, more than enough I believe, to cut out a full
>set.
>
>Eric
>***********************************
>
>> >I was wondering if Floor Board plans were available for the MGA. >Does
>anyone have a good choice on wood or how to get Marine Plywood? >
>>-Gary Stratton
>> garys@csidigital.com <mailto:garys@csidigital.com>
Try Todd Clarke of Clarke Spares and Restoration. I personally would go
with the prefab units, unless you really like wood working, and have a lot
of time on your hands. There are some strange angles, and place that need
to be routed out. Bottom line is... what's your time worth?
|