Dan:
Let me know if you need any shims. Just follow the book on doing the job.
Skip................At 05:46 PM 2/7/98 -0600, Dan Ray wrote:
>Skip,
>Thanks, I just got back from Louisville and picked up two quarts of Castrol
>LMA for the job.
>They didn't have the shims. The guy said he'd never had anyone ask for shims
>for a bearing job!
>
>Dan
>-----Original Message-----
>From: Skip Kelsey <kelsey@value.net>
>To: Dan Ray <danray@bluegrass.net>
>Date: Saturday, February 07, 1998 11:31 AM
>Subject: Re: Brake Related Questions
>
>
>>Dan:
>>
>>Thats a YES!! unless you are replacing everything, I would stick with Dot
>4.
>>
>>Skip................At 09:46 AM 2/7/98 -0600, Dan Ray wrote:
>>>Skip,
>>>Am I right to stick with the DOT since I'm not replacing the M/C or
>caliper
>>>pistons? I'd hate to ruin a good thing just to go to the "fancy" stuff,
>>>which as I said, seems to be a little harder to find around here.
>>>Dan
>>>-----Original Message-----
>
>
>
>
|