mgs
[Top] [All Lists]

Re: Help with 2 WS Quest.

To: Palmer Family <amesfolks@snovalley.com>
Subject: Re: Help with 2 WS Quest.
From: Art Pfenninger <ch155@FreeNet.Buffalo.EDU>
Date: Thu, 29 Jan 1998 13:47:05 -0500 (EST)
Question 1 yes a thin gasket
Question 2 Don't know.
Question 3 Remove the door panel and you will see screws holding the cap
on.
...Art

On Wed, 28 Jan 1998, Palmer Family wrote:

> 3 questions, 
> 
> 1.  Are there gaskets between the body and the base of the windshield
> wipers? (underneath the slanted chrome part)
> 
> 2. what oil or lube should I use to lube the shaft that turns the
> wipers(inside the tube)?
> 
> 3. how do you get the (aluminum?) caps of the doors( the part that should
> be covered in vinyl, that is round on the inside of the doors).  I need to
> get these off to recover them.
> 
> Ok, I just spent the last 2 hours polishing off the overspray that was left
> on ALL of the chrome part of my car. That two hours was spent getting the
> overspray off only the three slanted bases of the wipers, and the two door
> seal caps at the rear of the doors.  Now these will be the parts that will
> SHINE!
> 
> signed,
> BARRY PALMER
> amesfolks@snovalley.com
> 72 MG Midget (Sparky)
> 
> BTW, while I was polishing, a lawnmower repair shop that I used to have to
> take my go-kart carburetor to called and offered me a job!  Too bad my MG
> isn't driveable and I don't have a license!
> 
> 


<Prev in Thread] Current Thread [Next in Thread>