Christopher T Palmer wrote:
> But, with the key on I have no voltage going to the sender. All of the
> green wires which feed the switched systems seem to be in place, but I
> don't know the exact mode of operation of the voltage stabiliser. I know
> that there should be a green wire feeding it power, a light green/green
> wire between it and the fuel guage, and then a green/black going to the
> sender.
>
> I should have expected voltage on the LGG side of the fuel guage, no?
>
> ps - in case I can't find it in my Robert Bentley or Haynes, where is the
> voltage stabiliser itself located? (69 Midget MkIII (padded dash))
The voltage 'stabiliser' is a bi-metal strip that opens and closes a contact,
switching 12 on and off at the output a couple of times a second, I think it
averages out at about 10v. The case of the stabiliser must be at ground for
it to work correctly.
Can't help on the location, sorry.
PaulH.
|