You can get a puller at Pep Boys for about $6 dollars that will do the
trick. You may damage things if you use a makeshift method.
...Art
On Mon, 15 Dec 1997, Chris Delling wrote:
> In the process of disassembly of my motor (in the car) to replace the
> camshaft. I do not have an impact driver, and the car is up in the air on
> jackstands, making it difficult to use a breaker bar (the rear wheels want
> to spin). I consulted with a freindly local LBC mechanic, and he offered
> this tip. Put the breaker bar on the bolt. Brace the bar against the
> inner wing on the left side of the car. Hit the starter. Worked like a
> charm.
>
> Now the bolt is off. I don't have a puller, and am wondering if anyone has
> any tips for removing the pulley off the crankshaft. It seems to be on
> there pretty good.
>
> Regards,
>
> Chris Delling
>
>
>
|