In a message dated 97-11-12 09:56:50 EST, tsherman@tecinfo.com writes:
<< Subj: Re: Parts List vs Standard Hardware
Date: 97-11-12 09:56:50 EST
Todd,
Most of the nuts / bolts in MGBs are 5/16" fine thread
of various lengths. All the interior bits I've seen are
self-tapping sheet metal screws, phillips (pan head, I
think), painted black. You'll run into a few other size
bolts but most are 5/16".
Good luck with the B!
Tyson Sherman
(hardware store employee, engineering student)
76 MGB
http://www.tecinfo.com/~tsherman
>>
Gents:
Also remember there are PoziDrive screws also. Do not interchange
screwdrivers and both the driver and the screw will be damaged.
Regards,
Ed
|