At 11:06 pm 4/11/97 -0700, Phil Bates wrote:
>>Eric
>
>This is a twist on the same question. There is no reverse lockout, there
>never was a reverse lockout. The way it works is the switch is a lockout
>for all gears except 3rd and 4th. It is actually a 3-4 enable switch, not a
>1,2, R lockout switch. If that switch is hooked up properly, you should
>have no problem with reverse. All overdrive MGB transmissions - 3 and 4
>synchro - have this $15 contact switch - the same switch that is used as a
>reverse lamp switch later MGB's with back-up lights.
>
>Phil Bates
And what a swine of a thing it is to get to up on top of the transmission.
Graham
97 MGF
Graham McCann Rivett, ACT. Australia
gmccann@pcug.org.au
Phone/Fax: +61 2 62889055
______________________________________________________________
|