If you ask me, one Dremel-type tool is the same as any other. I had the
Black & Decker (I think) version for about 10 years before it finally
pooped out. I replaced it with a generic, flex-shaft type, variable
speed, from Sears a few years ago. The tools from the original work on
the new one.
The flex-shaft is easy on the hands (if you have CTS like me), but it is
a pain finding a good spot to put the motor unit while you're working.
I made myself a little strap and now hang it around my neck/shoulder to
keep it out of the way, and the shaft is long enough to reach from my
hip to the work, so it's just great.
I like the variable speed. It makes it a more versatile tool. Some
materials will burn up if you use a fast speed on it, and some jobs take
forever if it spins too slow. The variable speed insures you can use it
for just about anything.
I would think the cordless ones would lose power as the battery becomes
discharged, but OTOH, sometimes the limitations of a cord are a problem
(mine is corded).
I have found that the so-called "105 pc tool kit" usually has only about
10 different tools. For example, they'll include 20 cut-off wheels and
call that "20 tools". It's a little misleading. Most of the stuff in
the tool kit is pretty handy, and is cheaper to get as a kit than
individually, so it's good to get it. A case is a matter of personal
preference. I don't see why you can't use a shoe box.
-NORY
Don't assume that because you have found one problem, you have found the
ONLY problem.
'74 Midget & '71 parts car
'94 Ford Ranger
'86 Ford Escort
'89 Ford Probe
'96 North American Shepherd
http://www.geocities.com/SiliconValley/Way/9101
|