> ...and the size of my steering wheel nut...
>
> Ulix (the nut behind the wheel)
>
>
> On Thu, 9 Oct 1997, Thomas James Pokrefke, III wrote:
>
> > To the lister who was wondering what size bolt holds the pulley to the
> > front of the crankshaft, the size is 1 5/16". This is also the same
> > size of the nut that holds the hub to the rear axle on wire wheel cars.
I'm glad to hear the actual, official size is 1-5/16", but in a
pinch, a 1-3/8" will work with no slippage. Actually, you don't even
have to be in a pinch, as I've been using a 1-3/8" for months without
knowing any better.
Scott
Scott Gardner
gardner@lwcomm.com
www.lwcomm.com/~gardner
|