Now I am confused. I was told that there are two types of pistons, the
flat top variety prior to 1974 1/2 that yielded a stock CR of 8.7 to 1, and
the later dished that gave a standard 8.0 to 1. Have I been misinformed?
Regards,
Chris Delling
At 07:28 AM 10/7/97 -0400, you wrote:
>Chris
>If I remember correctly the flat top pistons alone will get you 9.0/1, as
>compared to the standard dished pistons which are 8.75/1. If this is so,
>shave is as little as possible in order to true it.
>
>Bob Shaw
>With 2 old heads that have an unusable compression ratio with todays fuel
>In Lincoln, NE.
>
>
|