Roger Wilt wrote:
>
> My thanks to the list again!. My error came when I crossed the wires, I
> had forgotten to turn on the ignition switch! Duhhh!! Bypassing the
> switch, I now have brake lights. I did double check with the volt meter
> and ..no juice with brake application sooooo off with the old and in
> with the new.
> Has anyone had success just cleaning out the old gunked switch? (or am I
> just too cheap?)
> Roger
> 51 TD
> Columbus
Yes, I cleaned and soaked my old switch and it worked. Don't use WD 40
as it contains water and will corrode again. I also purchased a new
switch just in case.
Steve
52 TD
|