mgs
[Top] [All Lists]

Re: Easy way to prime rebuilt engine

To: Teacher122@aol.com, tedtsimx@bright.net, jape@email.unc.edu
Subject: Re: Easy way to prime rebuilt engine
From: Spook37211@aol.com
Date: Thu, 25 Sep 1997 12:20:59 -0400 (EDT)
In a message dated 97-09-24 15:49:16 EDT, Teacher122@aol.com writes:

<< 
 In a message dated 97-09-23 22:37:28 EDT, tedtsimx@bright.net writes:
 
 << have everything ready to run. remove the distributor, run the oil pump
  with a drillto build up pressure.  drop in the sitirb. and you should
   >>
 If this is a B that we are talking about, it appears to me that in order to
 turn the oil pump through the distributor opening, one would end up having
to
 turn over the complete engine assembly as everything is interconnected
 through the camshaft.  I hope that your drill is blessed with mucho torque.
  I'm not saying that it isn't possible, it just doesn't seem to be the most
 efficient route.
  >>
I believe that the writer got the B engine mixed up with an American V-8.....
Ray

<Prev in Thread] Current Thread [Next in Thread>