----------
> From: Tyson Sherman <tsherman@tecinfo.com>
> To: Tyson Sherman <tsherman@tecinfo.com>
> Subject: Re: aaaah, what's that noise?
> Date: Sunday, September 14, 1997 6:45 PM
>
> Oh yeah, the important part about my noise...
> it only occurs in third or fourth gear (or OD)
> accelerating above, say, 1800 rpms.
> Thanks,
> Tyson
>
> ----------
> > From: Tyson Sherman <tsherman@tecinfo.com>
> > To: mgs@autox.team.net
> > Subject: aaaah, what's that noise?
> > Date: Sunday, September 14, 1997 6:43 PM
> >
> > Well I went to take my 76B for it's sunday
> > drive and it started rattling from somewhere
> > in the engine.
> > The engine is only about 6 months old with say
> > 500 or so miles on it. The noise was a rattling
> > noise, more high-pitched than rumbling low
> > (please dont' say bearings, they're new).
> > Driving before the engine rebuild I remember
> > distinctly the bearing rumble and valve clatter,
> > and this sounds like neither, really. I would
> > hope that the rockers aren't out of adjustment
> > already (haven't checked them yet).
> > The only things I've done differently are
> > replace plugs with proper length, and I filled
> > up with 91 octane as opposed to 93 that I've
> > been putting in.
> > Any suggestions on what it could be? Thanks,
> > Tyson
|