On Wed, 27 Aug 1997 23:02:59 -0400 (EDT) RJohn50603@aol.com writes:
(SNIP)
>P. S. Don't forget to take off your old spacers on the axles. I did
>not
>realize this was a separate part until I reassembled one side and
>things
>weren't fitting up quite right. I had to get the old set out of the
>box that
>I had taped up, ready to ship back to Ohio. This spacer is a chamfered
>ring
>that fits onto the axle before anything else goes on.
>
Just to start the day with a nit-pick, these aren't really "spacers";
they are called seal supports because they provide the surface for the
hub oil seal to ride on. They should always be checked to see that they
don't have deep grooves or other blemishes that will prevent the seals
from seating properly....
Lawrie
British Sportscar Center
www.britcars.com
|