I don't know if this goes along with the discussion but my Bentley has the
same thing. The solenoid actually changed the reflector so as to divert the
beam.
Cheers-
> ->As near as I can tell from the J2 literature I have here the nearside lamp
>>had the solenoid but it was always dipped....so that the wiring diagram
>>didn't need to show it.
>
>Do you have a J2 wiring diagram showing the solenoid dip lamp? I've never seen
>one, and the factory diagram that I have clearly shows the single filament
>lamp, no dipper. The offside lamp extingushes when the dip switch is flipped.
>If you have something that shows differently, I'd like to see it as I had
>numerous (friendly) debates with judges on this point, and finally carried
>Blowers manual in the car each time I showed it to prove the point.
>
>Blower does show the solenoid dipper on the TA. Do you have it?
>
>Bill Harkins
>Fallbrook, CA
>
>
>
>
Don Mathis,Ph.D.
donmathis@lucent.com
'61 MGA
'37 Derby Bentley (B190KT)
|