Hi Mike,
If the holes are really oversize, I'd drill the hole bigger and glue in a
plug cut from a piece of dowel rod. Then redrill for the correct size
screw. If the hole was just loose, I'd cheat and insert a few slivers of
wood maybe with a little wood glue and reinstall the screws. I wouldn't use
wood filler, but it might work. I'd prefer wood there, if possible.
Hope that helps.
John
----------
From: Mike Razor[SMTP:mrazor@kih.net]
Sent: Sunday, August 17, 1997 9:38 PM
To: mgs@autox.team.net
Subject: TD Dash
<<File: ATT00002.txt>>
|