Steve Tritle wrote:
>
> The points on my TD won't stay where I set them. All screws are tight
> and I drive for a short distance and all is well. I go to start the car
> again and the points need adjusting. Any solutions to this situation?
> This has never happened before. The points are well bedded in and only
> 2000 miles on them.
>
> Steve
> 52 TD
Are they opening wider on you, or closing up tighter? If they're
getting tighter (less gap/more dwell), the fiber or nylon (plastic?)
piece that bears on the distributor cam could be wearing abnormally.
Got a spot of lube on that cam?
--
*Bill Schooler *Check the MGCC Wash DC Centre Web Page
*Woodbridge, VA *http://members.aol.com/mgccwdcc/
*schooler@erols.com *Editor of The Spark
*69 B/GT, 53 TD *Web Page Coordinator
|