I don't know of a diaphragm pressure plate that fits the late TD, but I
know from experience that a common source of clutch judder in the TD is a
worn/broken rear mount (transmision mount). There was a tech tip in 'The
Sacred Octagon' regarding repairing this problem within the lasst year. In
a '53 that I owned back in the 60s replacing the rubber in the mount cured
a bad csse of judder, without touching the clutch.
Len Bugel
'51 TD
'57 MGA
On Thu, 17 Jul 1997, Dave Houser wrote:
> Does anyone know of a replacement diaphragm pressure plate that fits a
> late TD rather than the spring variety? I am told that clutch judder may
> be eliminated by this installation. I assume the stock clutch disc and
> throwout bearing stays the same? My TD uses the 8" type.
>
> Thanks in advance,
> Dave Houser
>
|