Ralph S. Cadwallader wrote:
> 7. The grinding equipment you need is of minor importance to the restraint you
> will need.
I can vouch for this. On a similar note, when doing bodywork,
I always take it to bare metal with machine, then do the
rest by hand, like shaping the bondo and so on.
It seems like it takes longer, but I do it in so many less
iterations because it's hard to screw up in a hurry by
hand compared to with the power sander.
With a porting job, you can't add some more filler and
do it again. Be really careful.
--
Trevor Boicey
Ottawa, Canada
tboicey@brit.ca
http://www.brit.ca/~tboicey/
|