mgs
[Top] [All Lists]

Re: Rubber Bumpers and Check Straps

To: DavidAndMichelleS@msn.com
Subject: Re: Rubber Bumpers and Check Straps
From: gofastmg@juno.com (Richard M Morrison)
Date: Fri, 16 May 1997 13:36:09 EDT
Another way to install the rubber bump-stops( and other rubber items that
install in a similar manner), is to lube the small end (that goes in the
hole), then take a piece of stout twine, wrap it around the small
diameter, feed the ends of the twine through the hole, then pull the
bump-stop through. It may help to apply pressure to the top of the stop. 
This is more easily accomplished with the help of a friend. Sometimes one
pair of hands can't apply enough force. After the stop is in place, pull
one end of the twine to remove.

Rick

<Prev in Thread] Current Thread [Next in Thread>