James N Ross wrote:
>
> Have almost completed reassembly of my 1800 rebuilt engine. Have removed air
> injection manifold and want to plug ports in the cylinder head. They are
> 7/16 in fine. Same as fly wheel bolts. The two end ports need a plug due to
> clearance problems with the casting. All the plugs I have found are pipe
> thread, not fine. Need help.
>
> Thanks
> Jim, 1973 mgb (Dad's Beauty)
Jim -
Get 7/16 fine thread set screws - have hex socket (Allen) heads. Screw
in nicely, with no protrusions above the head.
--
Keep on keepin' on!
Wayne Kube wkube@iadfw.net
1979 MGB http://web2.airmail.net/wkube
Plano, TX
Texas MG Register http://www.tmgr.org
NAMGBR UK Site http://www.mgcars.org.uk/namgbr
NAMGBR US Site http://www.british-cars.org.uk/kimber/namgbr
|