Thanks for the maintainance help, now I have a real problem. The front carb
float chamber is leaking from the bottom where the fuel feed pipe enters.
There is a nut at the connection, but I cannot seem to move it. Do I have
to remove the whole assembly (carbs, float chamber ect) or just try to loosen
the nut and re-tighten.
Also does anyone know exactly what size the nut is (carb is AUD549 - HS2). I
think the size is 12mm, but the space is tight & somewhat hidden.
Any help appreciated.
Pennie
74 Midget
|