Rich -
I rebuilt the HIF-4's with a standard "B" rebuild kit. So they are
identical to the B. It performs quite well, and I think it helps
that I flowed the head. This allows the engine to have an increased
air flow. (Similar to the B.) It seems to lack torque at low rpm's,
but that might be timing - which I haven't gotten around to setting
yet. It also might just be the way Midget's run. (I've never been in
another one.)
Dave Hall
72 BGT
74 Midget
http://www.pacifier.com/~dlhall
BTW - Nice page youself! :)
----------
From: Rich Mason
Sent: Thursday, March 06, 1997 8:59 AM
To: David Hall
Subject: Re: NEW Improved Web Page - Check Out HIF-4's on the Midget!
At 08:31 AM 3/6/97 -0800, you wrote:
> Be sure and check out the Dual HIF-4's I put on the midget also.
>
>
David-
I'm just curious - did the HIF-4's need rejetting, or are they performing
pretty well 'as-is'?
Oh - one other thing - I've updated my MG Page links to reflect the new
address of your MG page.
Regards,
Rich Mason
Madison, Alabama
__________________________________________
e-mail--> rmason@ro.com
WWW-----> http://ro.com/~rmason
MG Page-> http://ro.com/~rmason/mgpage.htm
__________________________________________
|