I said:
>It's a '77 MGB:
>
>You know that hose that goes from the carb to the breather tube (coming out
>of the engine side cover beneath the manifolds)? It seems that you need
>3/8" (I.D.) on the carb side, but 1/2" on the breather tube.
and CHRISTOPHER REICHLE sez:
>The breather should be connected to the air filter assembly not the vacuum
>side of the carb.
The only reference I can find that shows this hose is the Moss catalog, and
it's hooked up as I described above. If the breather *doesn't* go to the
big port on the carb, what *does* go there? (BTW, there aren't any ports
on my air filter assy.) There were a lot of under-bonnet changes after
1976.
>The large port on the intake manifold is for your brake booster.
I do have this connected properly.
Lee M. Daniels Laboratory for Molecular Structure and Bonding Texas A&M
daniels@tamu.edu (409) 845-3726 Fax (409) 845-9351
'74 TR6 '77 MGB
|